How To Install Crown Molding On Top Of Kitchen Cabinets. Installing crown molding on kitchen cabinets. The width of the backer board is approximately 1/8 inch smaller than the width of the molding.
Install Kitchen Crown Moulding Kitchen from www.pinterest.co.uk
The width of the backer board is approximately 1/8 inch smaller than the width of the molding. Do not forget to wear your safety glasses before starting any project, especially if it involves cutting wood. Crown molding refers to the decorative piece covering the top of kitchen cabinets.
Crown Molding Can Either Bond With The Ceiling Or Allow For Space Above The Cabinet.
Crown molding is decorative trim that is added to the top of your cabinets. They are normally used to complete a kitchen’s aesthetic look. Provide a nailing surface for crown moulding by attaching solid wood mounting strips to the top edges of the cabinets.
This Hides The Wood And Lets The Crown Molding Shine In All Its Glory.
You can use a finished filler or it can be touched up later. Installing crown molding on kitchen cabinets. First, fix the solid wood mounting strips (poplar board) on the top of the wall cabinets to provide a nailing surface for the crown molding.
The Width Of The Backer Board Is Approximately 1/8 Inch Smaller Than The Width Of The Molding.
Step 1, use a tape measure to find the length from one cabinet side to the next. Place the tape measure flush against each area you will add crown molding to. We didn't add skins to the sides of the refrigerator cabinet or the side of the wall cabinet.
Installing The Crown Molding Stops Dust From Collecting At The Cabinet Top And Closes The Gap Between The Cabinets And The Ceiling.
Dry fit your crown molding. If you are handy with a hammer and have an eye for design, installing crown molding on cabinets can be a fantastic diy project for the weekend. Then, use a pin nailer to bind the two together.
A Simple Method To Attach Crown Molding Is To Install A Plywood Backer Board To The Top Plate, Which Is The Horizontal Frame Above The Wall Studs.
Measure the length of the front of your cabinet. If you have cabinets that don't have enough room to attach directly, build a frame to sit on top of the cabinet. Doing so allows you to nail the molding to any point along every wall.
Tidak ada komentar:
Posting Komentar